Siemens SCALANCE XR-500 Operating Instructions Manual page 52

Installing and removing
5.2 Types of installation
Installation position
Only the following installation position is permitted for all installation types of the devices:
• Horizontal
The horizontal installation position is shown using the example of a control cabinet.
Figure 5-1
Note
Other installation positions are not permitted.
Cooling
The devices do not require any air flow generated by a fan for cooling in the control cabinet.
SFP transceivers
Information about pulling and plugging SFP or SFP+ transceivers can be found in the section
"Inserting and removing pluggable transceivers (Page 58)".
52
Horizontal installation position of devices in a control cabinet
Operating Instructions, 07/2023, C79000-G8976-C692-01
SCALANCE XR-500