Advanced - Sata Configuration - Protech Systems BM-2503 Series User Manual

5.4.2 Advanced – SATA Configuration
Menu Path
The SATA Configuration allows users to enable / disable the SATA controller as well
as the operational mode after the SATA controller is enabled. The following screen
indicates the functions available when the SATA hard drive is set to work in AHCI
mode.
BIOS Setting
SATA Controller(s)
SATA Mode Selection
Serial ATA Port 1 – 2,
M.2 Slot
Software Preserve
Port 1 - 2
Hot Plug
BM-2503 SERIES USER MANUAL
Advanced > SATA Configuration
SATA Configuration Screen
Options
- Disabled
- Enabled
- AHCI
- RAID
No changeable options
No changeable options
- Disabled
- Enabled
- Disabled
- Enabled
Chapter 5 BIOS Setup
Description/Purpose
Enables or Disables the on-chip SATA
Device. Default: Enabled.
Determines how SATA controller(s)
operate.
Displays the SATA device's name.
Displays if Software Preserve support.
Enables or Disables SATA Port Device.
Enables or Disables SATA Port Device
HotPlug function.
Page: 5-11