4.5
Installing Graphics Driver Utility
The graphics interface embedded in BM-2503 can support a wide
range of display types. You can have dual displays via VGA, DP and
LVDS interfaces and make the system work simultaneously.
To install the Graphics driver utility, follow the steps below:
1
Connect the USB DVD-ROM device to BM-2503 and insert the
driver disk.
2
Enter the Graphics folder where the driver is located (depending
on your OS platform).
3
Click the Setup.exe file for driver installation.
4
Follow the on-screen instructions to complete the installation.
5
Once the installation is completed, shut down the system and
restart BM-2503 for the changes to take effect.
BM-2503 SERIES USER MANUAL
Chapter 4 Software Utilities
Page: 4-7