Intel queens bay 3.5” embedded board with lvds / audio / 2 lan (97 pages)
Summary of Contents for Protech Systems BM-2503 Series
Page 1
USER MANUAL BM-2503 Mini-ITX Motherboard with Intel ® 7th / 6th Gen. Core i7/ i5/ i3 Pentium / Celeron Processor ® ® features 2 LAN / 1 VGA / 2 COM BM-2503 M1...
Page 2
BM-2503 Mini-ITX Motherboard with 7th / 6th Gen. Core ® Intel i7/ i5/ i3 ® ® Pentium / Celeron Processor COPYRIGHT NOTICE & TRADEMARK All trademarks and registered trademarks mentioned herein are the property of their respective owners. This manual is copyrighted in March 2018. You may not reproduce or transmit in any form or by any means, electronic, or mechanical, including photocopying and recording.
Page 3
FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Introduction This chapter provides the introduction for BM-2503 as well as the framework of the user manual. The following topics are included: • About This Manual Page: 1-1 BM-2503 SERIES USER MANUAL...
This chapter indicates you how to change the BIOS configurations. Appendix A Technical Summary This appendix provides the information about the allocation maps for BM-2503 block diagram, BM-2503 motherboard resources, Watchdog Timer Configuration and Flash BIOS Update. Page: 1-2 BM-2503 SERIES USER MANUAL...
It describes the package contents and outlines the motherboard specifications. The following topics are included: • Package List • BM-2503 Specification • Safety Precautions Experienced users can go to Chapter 3 Hardware Configuration on page 3-1 for a quick start. Page: 2-1 BM-2503 SERIES USER MANUAL...
Page 11
If you discover any of the items listed below are damaged or list, please contact your local distributor immediately. Item Q’ty BM-2503 Quick Reference Guide Manual / Driver DVD Mini Jumper (2.0 mm) SATA & SATA Power Cable (170mm) Page: 2-2 BM-2503 SERIES USER MANUAL...
Page 12
1 x DIO ( 8 in / 8 out) Environment Operating Temperature 0°C ~ 60°C (32°F~ 140°F) Storage Temperature -40°C ~ 80°C (-40°F~ 185°F) Humidity 5%~ 90% Note: Intel 7 generation CPU is ONLY compatible with Windows 10 IoT. Page: 2-3 BM-2503 SERIES USER MANUAL...
Always disconnect power when the system is not in use. Disconnect power source when you change any hardware devices. For instance, when you connect a jumper or install any cards, a surge of power may damage the electronic components or the whole system. Page: 2-4 BM-2503 SERIES USER MANUAL...
This chapter contains helpful information about the jumper & connector settings, and component locations. The following sections are included: • Jumper & Connector Quick Reference Table • Component Locations • Connector Configuration and Jumper Settings • Connector Pin Assignments Page: 3-1 BM-2503 SERIES USER MANUAL...
Make sure to ground yourself to prevent static charge while you are working on the connectors and jumpers. Use a grounding wrist strap and place all electronic components in any static-shielded devices. BM-2503 SERIES USER MANUAL Page: 3-4...
Page 18
CAUTION: Always touch the motherboard components by the edges. Never touch components such as a processor by its pins. Take special cares while you are holding electronic circuit boards by the edges only. Do not touch the main board components. Page: 3-5 BM-2503 SERIES USER MANUAL...
PIN1 & PIN2 to create one setting by shorting. You can either connect PIN2 & PIN3 to create another setting. The same jumper diagrams are applied all through this manual. The figure below shows what the manual diagrams look and what they represent. Page: 3-9 BM-2503 SERIES USER MANUAL...
Page 23
Jumper Block looks like this Jumper Settings 2 pin Jumper close(enabled) Looks like this 3 pin Jumper 2-3 pin close(enabled) Looks like this Jumper Block 1-2 pin close(enabled) Looks like this Page: 3-10 BM-2503 SERIES USER MANUAL...
RTS# CTS# DTR# Note: COM2 Pin 9 is selectable for RI, +5V or +12V by jumper setting. Default setting is RI. Please see “COM1, COM2 Port Pin9 Definition Selection Guide” section for selection details. Page: 3-12 BM-2503 SERIES USER MANUAL...
No LAN switch/hub connected Right Side LED Yellow Color Blinking LAN Message Active No LAN Message Active USB 3.0 signals: ASSIGNMENT ASSIGNMENT USBP1N USBP2N USBP1P USBP2P RX1_DN RX2_DN RX1_DP RX2_DP TX1_DN TX2_DN TX1_DP TX2_DP Page: 3-15 BM-2503 SERIES USER MANUAL...
Page 29
No LAN switch/hub connected Right Side LED Yellow Color Blinking LAN Message Active No LAN Message Active USB 3.0 signals: ASSIGNMENT ASSIGNMENT USBP3N USBP4N USBP3P USBP4P RX3_DN RX4_DN RX3_DP RX4_DP TX3_DN TX4_DN TX3_DP TX4_DP Page: 3-16 BM-2503 SERIES USER MANUAL...
Chapter 3 Hardware Configuration 3.4.7 VGA Port Port Location: VGA1 (rear I/O) Description: VGA (Video Graphics Array) Connector, D-Sub 15-pin (rear I/O) The pin assignments are as follows: ASSIGNMENT GREEN BLUE VGA1 VGA_DDCDATA HSYNC VSYNC VGA_DDC_CLK Page: 3-18 BM-2503 SERIES USER MANUAL...
Chapter 3 Hardware Configuration 3.4.9 DC IN 3 Pins Terminal Block (12V) Port Location: DC_IN (rear I/O) Description: DC IN 3 Pins Terminal Block (12V) ASSIGNMENT +12V +12V DC_IN Page: 3-20 BM-2503 SERIES USER MANUAL...
3.4.10 HD Audio Connector Port Location: AUDIO1 (rear I/O) Description: HD Audio Connector for Line In/Line Out/Mic In. Line In: ASSIGNMENT HD_LINE-IN-L HD_LINE-IN-R Line Out: ASSIGNMENT LINE-OUT-L LINE-OUT-R AUDIO1 Mic In: ASSIGNMENT HD_MIC1-L_L HD_MIC1-R_L Page: 3-21 BM-2503 SERIES USER MANUAL...
Description: CPU Fan Connector CPU Fan Connector signals: ASSIGNMENT +12V CPU_FAN1 Notes: 1. CPU Fan speed mode can be set by BIOS. 2. Default BIOS setting is “Auto Duty-Cycle Mode”. Please see Chapter 5 for more details. Page: 3-24 BM-2503 SERIES USER MANUAL...
Chapter 3 Hardware Configuration 3.4.22 DIO Port Power Connector Connector Location: JPWR_DIO1 Description: DIO Port Power Connector ASSIGNMENT +12V JPWR_DIO1 Page: 3-32 BM-2503 SERIES USER MANUAL...
Step 4. Power on the PC and the PC will then auto-reboot for once in order to set SoC’s register. Step 5. Done! SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Open Normal (Default Setting) JCMOS1 Clear CMOS Close Data JCMOS1 Note: Please make sure the main power is off before you clear CMOS. Page: 3-43 BM-2503 SERIES USER MANUAL...
Chapter 4 Software Utilities Introduction Enclosed with the BM-2503 Series package is our driver utilities contained in a DVD-ROM disk. Refer to the following table for driver locations: Filename (Assume that DVD- Purpose ROM drive is D :) Shell Win7 Win8.1 Win10 ...
Page 59
Microsoft Hotfix kb3211320 Platform\Hotfix and kb3213986 for (for Win 8.1 and Win 10) Windows10 critical security update X : Not support : Support Note: Install the driver utilities immediately after the OS installation is completed. BM-2503 SERIES USER MANUAL Page: 4-3...
(depending on your OS platform). Click SetupChipset.exe file for driver installation. Follow the on-screen instructions to install the driver. Once the installation is completed, shut down the system and restart BM-2503 for the changes to take effect. BM-2503 SERIES USER MANUAL Page: 4-4...
Connect the USB DVD-ROM device to BM-2503 and insert the driver disk. Enter the ME folder where the driver is located. Enter ME_Consumer_11.8.50.3399(H110) folder for H110 SKU or ME_Corporate_11.8.50.3399(Q170) folder for Q170 SKU. Click SetupME.exe file for ME driver installation. BM-2503 SERIES USER MANUAL Page: 4-5...
To install the utility, follow the steps below: Insert the driver disk into a DVD-ROM device. (For Windows 7 32/64bit only) Go to the directory where the driver is located. Run the application with the administrative privilege. BM-2503 SERIES USER MANUAL Page: 4-6...
OS platform). Click the Setup.exe file for driver installation. Follow the on-screen instructions to complete the installation. Once the installation is completed, shut down the system and restart BM-2503 for the changes to take effect. BM-2503 SERIES USER MANUAL Page: 4-7...
Once the installation is completed, shut down the system and restart BM-2503 for the changes to take effect. For more details on the installation procedure, refer to the Readme.txt file that you can find on LAN Driver Utility. BM-2503 SERIES USER MANUAL Page: 4-8...
Click the windows10.0-kb3211320-x64 and windows10.0-kb3213986-x64 files for critical security update. Follow the on-screen instructions to complete the installation. Once the installation is completed, shut down the system and restart BM-2503 for the changes to take effect. BM-2503 SERIES USER MANUAL Page: 4-9...
The BIOS Setup Utilities consist of the following menu items: • Accessing Setup Utilities • Main Menu • Advanced Menu • Chipset Menu • Boot Menu • Security Menu • Save & Exit Menu BM-2503 SERIES USER MANUAL Page: 5-1...
EFI BIOS provides an user interface that allows you to modify hardware configuration, e.g. change the system date and time, enable/disable a system component, determine bootable device priority, set up personal password, etc., which is convenient for engineers to perform modifications and customize the computer BM-2503 SERIES USER MANUAL Page: 5-2...
POST message will be displayed: Figure 5-2. POST Screen with AMI Logo Press <Del> or <Esc> to access the Setup Utility program and the Main menu of the Aptio Setup Utility will appear on the screen as below: BM-2503 SERIES USER MANUAL Page: 5-3...
Page 69
English. You may use <↑> or <↓> key to select among the items and press <Enter> to confirm and enter the sub-menu. The following table provides the list of the navigation keys that you can use while operating the BIOS setup menu. BM-2503 SERIES USER MANUAL Page: 5-4...
Page 70
Load the previous configuration values. <F3> Load the default configuration values. <F4> Save the current values and exit the BIOS setup menu. <Esc> Close the sub-menu. Trigger the confirmation to exit BIOS setup menu. BM-2503 SERIES USER MANUAL Page: 5-5...
Build Date and No changeable options Displays the date that the current BIOS Time version is built. System Date Month, day, year Sets the system date. The format is [Day Month/ Date/ Year]. Users can directly BM-2503 SERIES USER MANUAL Page: 5-6...
Page 72
The “Day” is automatically changed. System Time Hour, minute, second Sets the system time. The format is [Hour: Minute: Second]. Users can directly enter values or use <+> or <-> arrow keys to increase/decrease it. BM-2503 SERIES USER MANUAL Page: 5-7...
Displays L4 Cache size. CPU VMX hardware support for No changeable options virtual machines. SMX/TXT No changeable options Reports if Intel Secure Mode Extensions Technology (SMX) /Trusted Execution Technology (TXT) is supported by the processor. BM-2503 SERIES USER MANUAL Page: 5-9...
Page 75
PC microprocessor. For each processor core that is physically present, the operating system addresses two virtual processors, and shares the workload between them when possible. BM-2503 SERIES USER MANUAL Page: 5-10...
No changeable options Displays if Software Preserve support. - Disabled Port 1 - 2 Enables or Disables SATA Port Device. - Enabled - Disabled Enables or Disables SATA Port Device Hot Plug - Enabled HotPlug function. BM-2503 SERIES USER MANUAL Page: 5-11...
Description/Purpose ME Firmware No changeable options Displays the ME Firmware Version. Version ME Firmware Mode No changeable options Displays the ME Firmware Mode. ME Firmware SKU No changeable options Displays the ME Firmware SKU. BM-2503 SERIES USER MANUAL Page: 5-12...
BIOS Setting Options Description/Purpose Security Device - Enable Enables or Disables BIOS support for Support - Disable security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available. BM-2503 SERIES USER MANUAL Page: 5-13...
SUSPEND button RAM) is pressed. Lock Legacy - Disabled Enables or Disables Lock of Legacy Resources - Enabled Resources. - Disabled S3 Video Repost Enables or Disables S3 Video Repost. - Enabled BM-2503 SERIES USER MANUAL Page: 5-14...
F81866 Super IO Configuration Screen BIOS Setting Options Description/Purpose Sets the parameters of Serial Port 1 Serial Port 1 Configuration Sub-menu (COMA). Sets the parameters of Serial Port 2 Serial Port 2 Configuration Sub-menu (COMB). BM-2503 SERIES USER MANUAL Page: 5-15...
Page 81
Displays the current settings of Serial Port 1. Change Settings - Auto Selects IRQ and I/O resource - IO=3F8h; IRQ=4; settings for Serial Port 1. - IO=3F8h; IRQ=3,4,5,6,7,10,11; - IO=2F8h; IRQ=3,4,5,6,7,10,11; - IO=3E8h; IRQ=3,4,5,6,7,10,11; - IO=2E8h; IRQ=3,4,5,6,7,10,11; BM-2503 SERIES USER MANUAL Page: 5-16...
Page 82
Displays the current settings of Serial Port 2. Change Settings - Auto Selects IRQ and I/O resource for - IO=2F8h; IRQ=3; Serial Port 2. - IO=3F8h; IRQ=3,4,5,6,7,10,11; - IO=2F8h; IRQ=3,4,5,6,7,10,11; - IO=3E8h; IRQ=3,4,5,6,7,10,11; - IO=2E8h; IRQ=3,4,5,6,7,10,11; BM-2503 SERIES USER MANUAL Page: 5-17...
Displays the voltage level of VSB5V VSB5V No changeable options in supply. Displays the voltage level of VCC5V VCC5V No changeable options in supply. VCC12 No changeable options Displays the voltage level of VCC12 BM-2503 SERIES USER MANUAL Page: 5-18...
CPU Fan Smart Fan Control - Auto Duty-Cycle Fan. Mode Manual mode fan control. Users can Manual Duty Mode Numeric (from 1 to 100) write expected duty cycle (PWM fan type) from 1 to 100. BM-2503 SERIES USER MANUAL Page: 5-19...
Enables/Disables F81866 Watchdog Enable Watchdog - Enabled timer settings. - 1s Watchdog timer unit Watchdog timer unit. - 60s Numeric Count for Timer (Seconds) The number of count for Timer. (from 10 to 255) BM-2503 SERIES USER MANUAL Page: 5-20...
- Enabled disabled, Ipv4 PXE boot option will not Support be created. Ipv6 PXE - Disabled Enables Ipv6 PXE Boot Support. If Support - Enabled disabled, Ipv6 PXE boot option will not be created. BM-2503 SERIES USER MANUAL Page: 5-21...
The USB Configuration allows users to enable/disable USB mass storage driver support. USB Configuration Screen BIOS Setting Options Description/Purpose USB Mass Storage Driver - Disabled Enables/Disables USB Mass Storage Support - Enabled Driver Support. BM-2503 SERIES USER MANUAL Page: 5-22...
This menu allows users to configure advanced Chipset settings such as such as System Agent (SA) and PCH-IO configuration parameters. Chipset Screen BIOS Setting Options Description/Purpose System Agent (SA) Sub-menu System Agent (SA) Parameters. Configuration PCH-IO Configuration Sub-menu PCH Parameters. BM-2503 SERIES USER MANUAL Page: 5-23...
BIOS Setting Options Description/Purpose Memory RC Version No changeable options Displays the Memory RC Version. Memory Frequency No changeable options Displays the Frequency of Memory. Memory Timings No changeable options Displays the Memory (RAM) timings BM-2503 SERIES USER MANUAL Page: 5-25...
Page 91
(tRAS = tCL + tRCD + tRP). Displays if SO-DIMM#1 socket is SO-DIMM#1 No changeable options populated/enabled or not. Displays if SO-DIMM#2 socket is SO-DIMM#2 No changeable options populated/enabled or not. Size No changeable options Displays the total memory size. BM-2503 SERIES USER MANUAL Page: 5-26...
Page 92
Chipset > System Agent (SA) Configuration > Graphics Configuration Graphics Configuration Screen BIOS Setting Options Description/Purpose - Auto Selects which Graphics device should be Primary Display - IGFX Primary Display. LCD Control Sub-menu LCD Control sub-menu. BM-2503 SERIES USER MANUAL Page: 5-27...
Page 93
The LCD Control allows users to select the primary display device. LCD Control Screen BIOS Setting Options Description/Purpose Primary IGFX - VBIOS Default Selects Primary Display Device Boot Display - VGA - LVDS - DisplayPort BM-2503 SERIES USER MANUAL Page: 5-28...
Displays PCI-E1 Link and speed information. Enable Root Port - Disabled Enables or Disables the Root Port. - Enabled - Auto Max Link Speed - Auto Configures PCI-E1 maximum speed. - Gen1 - Gen2 - Gen3 BM-2503 SERIES USER MANUAL Page: 5-29...
Default: Enabled. State After G3 - Power On Specifies the Power On/Off state that the - Power Off system will go into when the power is re-applied following a power failure (G3 state). BM-2503 SERIES USER MANUAL Page: 5-30...
Setup utility. Security Screen BIOS Setting Options Description/Purpose Administrator Password can be 3-20 Specifies the administrator password. Password alphanumeric characters. Password can be 3-20 User Password Specifies the user password. alphanumeric characters. BM-2503 SERIES USER MANUAL Page: 5-31...
Page 97
2. Select the configured Administrator Password or User Password that you want to delete. Leave the dialog box blank and press <Enter>. 3. Press <Enter> again when the password confirmation box appears. BM-2503 SERIES USER MANUAL Page: 5-32...
Selects the NumLock sate after the system NumLock State - Off is powered on. • On: Enables the NumLock function automatically after the system is powered on. • Off: Disables the NumLock function after the system is powered on. BM-2503 SERIES USER MANUAL Page: 5-33...
Page 99
- Disabled Note that in the menu displayed, you will only see the device with the highest priority for a specific boot device type. Sub-Menu CSM configuration: Enable/Disable, Configuration Option ROM execution settings, etc. BM-2503 SERIES USER MANUAL Page: 5-34...
- UEFI and Legacy This option controls Legacy/UEFI ROMs Boot option filter - Legacy only priority. - UEFI only - Do not launch Controls the execution of UEFI and Network - UEFI Legacy PXE OpROM. - Legacy BM-2503 SERIES USER MANUAL Page: 5-35...
Page 101
- Do not launch Legacy Video OpROM. Video - UEFI - Legacy Determines OpROM execution policy for - Do not launch Other PCI devices other than Network, Storage or - UEFI devices Video. - Legacy BM-2503 SERIES USER MANUAL Page: 5-36...
Discard Changes and Reset to discard any changes you have made and restore the factory BIOS defaults. Load User Defaults You may simply press F3 at any time to load the Optimized Values which resets all BIOS settings to the factory defaults. Save & Exit Screen BM-2503 SERIES USER MANUAL Page: 5-37...
Page 103
Saves the changes done so far as User No changeable options Defaults Defaults. Restore User Restores the User Defaults to all the BIOS No changeable options Defaults settings. Boot Override - [Drive(s)] Forces to boot from selected [drive(s)]. BM-2503 SERIES USER MANUAL Page: 5-38...
This appendix will give you a brief introduction of the allocation maps for BM-2503 resources. The following topics are included: • BM-2503 Block Diagram • Interrupt Map • I/O Map • Memory Map • Configuring WatchDog Timer • Flash BIOS Update BM-2503 SERIES USER MANUAL Page: A-1...
IRQ 76 Microsoft ACPI-Compliant System IRQ 77 Microsoft ACPI-Compliant System IRQ 78 Microsoft ACPI-Compliant System IRQ 79 Microsoft ACPI-Compliant System IRQ 80 Microsoft ACPI-Compliant System IRQ 81 Microsoft ACPI-Compliant System IRQ 82 Microsoft ACPI-Compliant System Page: A-3 BM-2503 SERIES USER MANUAL...
Page 107
IRQ 119 Microsoft ACPI-Compliant System IRQ 120 Microsoft ACPI-Compliant System IRQ 121 Microsoft ACPI-Compliant System IRQ 122 Microsoft ACPI-Compliant System IRQ 123 Microsoft ACPI-Compliant System IRQ 124 Microsoft ACPI-Compliant System IRQ 125 Microsoft ACPI-Compliant System Page: A-4 BM-2503 SERIES USER MANUAL...
Page 108
IRQ 162 Microsoft ACPI-Compliant System IRQ 163 Microsoft ACPI-Compliant System IRQ 164 Microsoft ACPI-Compliant System IRQ 165 Microsoft ACPI-Compliant System IRQ 166 Microsoft ACPI-Compliant System IRQ 167 Microsoft ACPI-Compliant System IRQ 168 Microsoft ACPI-Compliant System Page: A-5 BM-2503 SERIES USER MANUAL...
Page 109
IRQ 256 Microsoft ACPI-Compliant System IRQ 257 Microsoft ACPI-Compliant System IRQ 258 Microsoft ACPI-Compliant System IRQ 259 Microsoft ACPI-Compliant System IRQ 260 Microsoft ACPI-Compliant System IRQ 261 Microsoft ACPI-Compliant System IRQ 262 Microsoft ACPI-Compliant System Page: A-6 BM-2503 SERIES USER MANUAL...
Page 110
IRQ 299 Microsoft ACPI-Compliant System IRQ 300 Microsoft ACPI-Compliant System IRQ 301 Microsoft ACPI-Compliant System IRQ 302 Microsoft ACPI-Compliant System IRQ 303 Microsoft ACPI-Compliant System IRQ 304 Microsoft ACPI-Compliant System IRQ 305 Microsoft ACPI-Compliant System Page: A-7 BM-2503 SERIES USER MANUAL...
Page 111
IRQ 342 Microsoft ACPI-Compliant System IRQ 343 Microsoft ACPI-Compliant System IRQ 344 Microsoft ACPI-Compliant System IRQ 345 Microsoft ACPI-Compliant System IRQ 346 Microsoft ACPI-Compliant System IRQ 347 Microsoft ACPI-Compliant System IRQ 348 Microsoft ACPI-Compliant System Page: A-8 BM-2503 SERIES USER MANUAL...
Page 112
IRQ 385 Microsoft ACPI-Compliant System IRQ 386 Microsoft ACPI-Compliant System IRQ 387 Microsoft ACPI-Compliant System IRQ 388 Microsoft ACPI-Compliant System IRQ 389 Microsoft ACPI-Compliant System IRQ 390 Microsoft ACPI-Compliant System IRQ 391 Microsoft ACPI-Compliant System Page: A-9 BM-2503 SERIES USER MANUAL...
Page 113
IRQ 428 Microsoft ACPI-Compliant System IRQ 429 Microsoft ACPI-Compliant System IRQ 430 Microsoft ACPI-Compliant System IRQ 431 Microsoft ACPI-Compliant System IRQ 432 Microsoft ACPI-Compliant System IRQ 433 Microsoft ACPI-Compliant System IRQ 434 Microsoft ACPI-Compliant System Page: A-10 BM-2503 SERIES USER MANUAL...
Page 114
IRQ 471 Microsoft ACPI-Compliant System IRQ 472 Microsoft ACPI-Compliant System IRQ 473 Microsoft ACPI-Compliant System IRQ 474 Microsoft ACPI-Compliant System IRQ 475 Microsoft ACPI-Compliant System IRQ 476 Microsoft ACPI-Compliant System IRQ 477 Microsoft ACPI-Compliant System Page: A-11 BM-2503 SERIES USER MANUAL...
Page 116
Standard SATA AHCI Controller IRQ 4294967294 Intel(R) 100 Series/C230 Series Chipset Family PCI Express Root Port #6 - A115 Note: These resource information were gathered using Windows 10 (the IRQ could be assigned differently depending on OS). Page: A-13 BM-2503 SERIES USER MANUAL...
To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once the chip exits the Extended Function Mode, it is in the normal running mode and is ready to enter the configuration mode. Page: A-18 BM-2503 SERIES USER MANUAL...
Page 122
;---------------------------------Enable Watch dog feature ------------------------------ 030h ;------------------------------- Enable Watch PME-------------------------------------------- 0FAh ; ------------------------ Set timeout interval to 30 ------------------------------------------ 0F6h ;-------------------Set second as counting unit and start counting --------------------- 0F5h ;---------------------------------Exit the extended function mode ------------------------- 0AAh Page: A-19 BM-2503 SERIES USER MANUAL...
(3) Select [Boot] menu and set [UEFI: Built-in EFI Shell] to be the 1 boot device. (4) Press <F4> key to save the configuration and restart the system to boot into EFI Shell environment. Page: A-20 BM-2503 SERIES USER MANUAL...
Page 124
/?” to view the definition of each control option. The recommended options for BIOS ROM update include the following parameters: Program main BIOS image. /B: Program Boot Block. /N: Program NVRAM. /X: Don’t check ROM ID. Page: A-21 BM-2503 SERIES USER MANUAL...
Page 125
Erasing NVRAM Block ..done Updating NVRAM Block ..done Verifying NVRAM Block ..done fs0:\afuefix64> _ Restart the system and boot up with the new BIOS configurations. The BIOS Update is completed after the system is restarted. Page: A-22 BM-2503 SERIES USER MANUAL...
Page 126
Appendix A Technical Summary Reboot the system and verify if the BIOS version shown on the initialization screen has been updated. Page: A-23 BM-2503 SERIES USER MANUAL...