Entry To Mission Critical Geofence; Exit From Mission Critical Geofence - Motorola APX 2 User Manual

MN009203A01-AD
Chapter 17 : Mission Critical Geofence (ASTRO 25 Trunking)
When the radio exits the Geofence area, your radio reverts to original channel or newly assigned
talkgroup. The radio display shows the new channel together with Voice Announcement to indicate the
changes. Voice Announcement of the new channel only works if that channel is configured with Voice
Announcement.
17.2

Entry to Mission Critical Geofence

When the radio enters the predefined Geofence area, the radio displays <Geofence Alias>. The
radio display also shows the intelligent backlight, and you hear a Voice Announcement. Zone and
channel alias of the Geofence area is displayed.
If the radio is set to manual, you can choose either to proceed with zone and channel change, or
cancel the change.
The radio then connects to the designated talkgroup. The radio displays the talkgroup alias and
dynamic regroup tone sounds. The level changes for transmit power and, your radio shows a direct
text message content without any user operation.
NOTE:
The availability of the Voice Announcement (VA), Text Messaging Service (TMS) display,
Intelligent Backlight, and Transmit Power Level alerts depend on your radio configuration. The
VA can be programmed to alert continuously, or momentarily.
If Site Selectable Alert (SSA) is enabled, the radio mutes any alert that is received when
entering the Geofence area, and unmutes when exiting.
17.3

Exit from Mission Critical Geofence

When the radio exits the Geofence area, the radio reverts to the original transmit power level,
intelligent lighting, channel, or newly assigned talkgroup. Voice announcement (VA) is canceled or
you hear a programmed VA tone. The radio displays the new channel, and a message is received to
indicate the changes.
76