Table of Contents
Advertisement
MS-6728 ATX Mainboard
Volumn Control
Click on the Volumn Control tab and the following screen appears.
You may regulate each volumn to the speaker for current playing digital
sound sources. If you use 2-channel speaker, only Front Left and Front Right
bars are available for you to configure. If you use 4-channel speaker, only
Front Left, Front Right, Rear Left and Rear Right bars are available. In 6-channel
mode, you may adjust all the speakers as showed above.
! Loudness (AGC): Loudness w/Auto-Gain-Control: When you want a higher
volume level of digital audio, you can enable Loudness (AGC). It provides
extra +3dB to +12dB gain to all channels. The driver has also been designed
with a sophisticated auto gain control minimizing the signal clipping
distortion. However, it is not recommended to
enhance the volume too much here if you want a
best sound quality. The best way is to increase the
volume of external speakers or just to increase the
Master Volume in Microsoft Volume Control.
A-10
Left-click Microsoft "Volume
Control" icon once and you'll
get the Master Volume control
slider.
Reset all to
default value
(0dB)
Advertisement
Table of Contents
