Safety Precautions - Kenwood KDC-3011 Instruction Manual

Safety precautions
¢ If you experience problems during
installation, consult your Kenwood dealer.
e If the unit does not seem to be working right,
try pressing the reset button first. If that does
not solve the problem, consult your Kenwood
dealer.
Reset button
® Characters in the LCD may become difficult
to read in temperatures below 41 °F (5 °C}.
Cleaning the Faceplate Terminals
(KDC-3011/2011S only)
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
Cleaning the Unit
_If the front panel gets dirty, turn off the
power and wipe the panel with a dry silicon
cloth or soft cloth.
ACAUTION
Do not wipe the panel with a hard cloth or a
cloth dampened by volatile solvents such as
paint thinner and alcohol. They can scratch
the surface of the panel and/or cause the
indicator etters to peel off.
Cleaning the CD Slot
As dust tends to accumulate in the CD slot,
clean it every once in a while. Your CDs can
get scratched if you put them in a dusty CD
slot.
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a while,
consult your Kenwood dealer.