Kenwood KDC-3011 Instruction Manual page 24

. Connect the wiring harness connector to the unit.
. Install the unit in your car.
. Reconnect the © battery.
. Press the reset button.
* After the unit is installed, check whether the brake lamps,
The use of any accessories except for those provided might result
fe a se baca rana le SEK Vl ane or oer ciilar
in damage to the unit. Make sure only to use the accessories
the section on "Safety Precautions' for details.
* Mount the unit so that the mounting angle is 30° or less.
os
ON DO
@
a ee