Philips 42-LCD FLAT HDTV PIXEL PLUS 2 HD 42PF9830A User Manual page 35

2496.1 16x24 en 14-12-2005
§
In case has been selected in the Mode menu:
Color
• Select in the Ambilight menu and press the cursor right.
Color
• Select
Auto Color
or .
Blue
• Select
Palette
• Select Saturation
Note:
- Adjusting the Palette and/or Saturation settings will set the color mode to Personal.
- The selected color mode will be the one used when turning on the ambient lights from standby mode.
è
In case
Ambience
• Select
Separation
• Select for a mono behavior which means that all lamps will behave equally.
Off
• Select
Minimum
lamps.
! Select
Balance
intensity on the left and right side of the picture to perfectly match your room setup.
Auto Color modes:
• : Select any color or hue to match to your personal taste, e.g. your interior, the program
Personal
content (sports, movie, etc.), the mood you are in, etc.
• Warm white :The color is matched to that of most normal lightbulbs. Select this setting if you want
the Ambilight to fit best with normal living room lighting.
• :The color is matched to that of normal daylight (6500K). Select this setting if you prefer
Cool white
more cool lighting.
Note: the 6500 K is the SMPTE recommended setting for ambient backlighting of displays.
• :The blue color is preferred by most consumers to create a cool, modern and /or mystical
Blue
atmosphere. Select this setting according to your personal taste or mood.
Note: Infrared interference on external devices:
To avoid bad infrared remote control reception, place your external devices out of sight of the ambient lights of
your TV set.
Ambilight does not function well when the room temperature is less than 59°F/15°C.
10:11 Pagina 31
and press the cursor right again to select
to select the general color of the light.
to adjust the colorfulness of the light.
, , or
Relaxed Movie Action
in the Ambilight menu and press the cursor right.
, or
Medium Maximum
and use the cursor left/right to adjust and generate any color and level of light
Personal
has been selected in the Mode menu:
to define the Ambilight stereo effect over the available
, ,
Warm white Cool white
31