Installation; Select The Menu Language; Store Tv Channels - Philips 42-LCD FLAT HDTV PIXEL PLUS 2 HD 42PF9830A User Manual

2496.1 16x24 en 14-12-2005

Installation

Select the menu language

Settings
TV
Setup
Installation
(CableCARD applications)
Demo
Exit
Info

Store TV channels

Settings
Installation
Language
Autoprogram
Weak channel installation
TV Guide On Screen
Software upgrade
Info
Television
Installation mode
Antenna
Cable
Previous Next
14
10:11 Pagina 14
Installation
Language
Autoprogram
Weak channel installation
TV Guide On Screen
Software upgrade
Autoprogram
Start now
Please select your installation mode
&
Press the button on the remote
MENU
control.
é Use the cursor down to select
in the Settings menu.
" Use the cursor right to enter the Installation
menu.
'
Select and enter the list of
Language
available languages with the cursor right.
(
Select your language with the cursor
up/down and press the
confirm you selection.
§
Proceed with the Installation menu.
&
Select in the Installation
Autoprogram
menu.
é
Use the cursor right to enter the
Autoprogram menu.
"
Press the button.
OK
' Select or
Cable Antenna
mode.
When is selected, the TV will
Antenna
detect antenna signals and will search for
antenna TV (NTSC and ATSC) channels
available in your local area.
When is selected, the TV will detect
Cable
cable company supplied signals and will
search for cable TV (NTSC, ATSC, QAM
modulated) channels available in your area.
Make sure that registration with your cable
TV provider and connection of equipment
are completed.
( Press the green button
remote control.
Note: All channels must be unlocked in order to
autoprogram. If requested, enter your PIN code to
unlock all channels. See Menu preferences in the
Settings, TV menu, p. 21.
§
Press the green button
autoprogramming.The menu screen
disappears and the progress of
autoprogramming is displayed.
The progress bar indicates the number of
analog and digital TV channels found. (Also
digital channels via CableCARD are being
programmed. First refer to the CableCARD
settings, see p. 25).
When Autoprogramming is complete, a
message appears confirming the completion
and the TV switches to the first installed TV
channel.
Installation
button to
OK
in the Installation
on the
"Next"
"Start" to start