Philips 42-LCD FLAT HDTV PIXEL PLUS 2 HD 42PF9830A User Manual page 25

2496.1 16x24 en 14-12-2005
Menu preferences
OSD
Settings/Setup
Preferences
Picture/sound preferences
Features preferences
Menu preferences
Reset AV settings
Info
Show emergency alerts (EAS)
Note: Emergency Alert Signalling is not possible:
- when content browsing;
- with analogue video sources.
This allows you to select the alert priority level of the information disseminated by the cable
operator.The standard SCTE18 defines an Emergency Alert signalling method for use by cable TV
systems to signal emergencies to digital devices such as digital set-top boxes, digital TVs and digital
VCRs.
The Emergency alert signalling scheme defined in the standard allows a cable operator to disseminate
emergency alert information related to state and local-level emergencies and warnings in a cost-
effective and efficient way, while minimizing disruption of programming.
An Emergency alert message will have one of the following priorities:
Maximum .
The Emergency alert message with priority
will be present or ignored depending on the selected setting.
Medium
Important: When the TV clock is undefined (See Setup menu, Clock, p. 24), the Emergency Alerts will be
ignored.
The Emergency Alert message display will contain following information:
- The Emergency Alert text
- The start time + date
- The end time + date.
& Select
Show Emergency Alerts
é
Press the cursor right and select one of the Emergency alerts options:
- , when you always want the Emergency alert messages to be displayed when available;
Always
-
Skip low priority
-
Skip low/medium priority
Notes:
- You always have the possibility to remove the message from the screen.
- The message display will overlap whatever menu element or other message is on the screen.
10:11 Pagina 21
Menu preferences
OSD
Show emergency alerts
Change PIN
High
in the Menu preferences menu.
, when you want the messages with low level to be ignored;
, when you only want the messages with high priority to be displayed.
&
Select .
OSD
é Press the cursor right to select
Minimum .
Normal to activate the continuous display of
the channel number (for max. 10 minutes) and
extended display of TV channel and program
information on screen. E.g. information on the
main or auxiliary program, input signal quality
of connected accessory devices, the display
format, sound mode, availability of Closed
Caption service, the audio language, the rating,
sleeptimer setup.
to activate the display of reduced
Minimum
channel information.
Note: When Closed Captions is switched on,
continuous display of the channel number and clock
is not possible.
Low , Medium
or will always be presented.
Maximum
or
Normal
, High or
or
Low
21