Clock - Philips 42-LCD FLAT HDTV PIXEL PLUS 2 HD 42PF9830A User Manual

2496.1 16x24 en 14-12-2005

Clock

This allows you to use your TV as a clock.
Note: most of the TV channels are not transmitting clock information. There are few cable channels but they are at
the end of the channel ring. There is no clock transmission in antenna channels. In such cases either clock extraction
is taking a long time or there is no clock.
Settings
Setup
Preferences
Source
Clock
Info
Auto clock mode
& Select in the Setup menu.
Clock
é
Press the cursor right to select the
" Press the cursor right to instruct the TV to get the time automatically or manually.
Auto clock channel
With the cursor buttons, select the channel number where time can be found by the TV. Typically time
can be found on PBS as well as some other channels.
Time - Day (only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time and day.
If
Auto clock mode Manual
keep the entered time and day.
Time zone
(only available when Auto clock mode is set to Automatic)
This function allows you to select your local time zone. Broadcasted time information will correct the
clock display for your local time.
& Select
Time zone
é
Press the cursor right to select your local time zone.
Daylight saving
(only available when Auto clock mode is set to Automatic)
Daylight saving time is automatically set by specially broadcasted signals.This menu item allows you to
disable the automatic setting of daylight saving time.This is useful if you live in an area or state where
daylight saving is not applied, but you receive channels from other areas where daylight saving signals
are broadcasted.
& Select
Daylight saving
é
Press the cursor right to select
based on specially broadcasted signals.
"
Select Off to disable automatic clock correction based on the specially broadcasted signals.
24
10:11 Pagina 24
Clock
Auto clock mode
Auto clock channel
Time
Day
Time zone
Daylight saving
Auto clock mode
(only available when Auto clock mode is set to Automatic)
has been selected, and no clock search has been done, the system will
with the cursor down.
with the cursor down.
for automatic clock correction for daylight saving time,
Automatic
When the TV Guide On Screen clock is available
this menu is not available.The TV Guide On
Screen clock calibration will be used.When TV
Guide On Screen has not been set up, or TV
Guide On Screen data is not available, select Auto
clock mode Automatic or Manual.
Note: Adjusting the clock is necessary for the correct
working of Instant record (See use of the remote
control, p. 9) and Lock after (See TV settings,
Channels, p. 32) features.
.