Feeding And Positioning Paper; Line Feed/Form Feed; Micro Feed; Load Position Adjust - Fujitsu DL7400Pro User Manual

FEEDING AND
POSITIONING
PAPER
User's Manual
The following functions are available whether the printer is online or
offline.

Line Feed/Form Feed

Use the line feed/form feed function to move paper forward.

Pressing and holding down the LF/FF button feeds one sheet of
paper.

Pressing the LF/FF button once advances the paper one line (do
not hold the button more than three seconds).

Micro Feed

Use the micro feed function to fine tune the position of the paper.

Press the  MICRO button to feed paper backward by 1/180
inch.

Press the  MICRO button to feed paper forward by 1/180 inch.
Remember that the top-of-form will differ from the original setting.

Load Position Adjust

Use also the micro feed function to adjust the load position of the paper.

When the  MICRO button or the  MICRO button is used
immediately after the LOAD button is pressed, the adjusted
position of paper is retained as the new load position until the
power is turned off.

Pressing the ONLINE and LOAD buttons simultaneously saves
the new position permanently.
The load position can be set for single sheets and continuous forms
respectively.
Adjusting Load Position by Using Window of Card Guide
The lines of window on the right side of card guide indicate printing line.
So use this as a guide to adjust load position.
PAPER HANDLING
Window
Card Guide
3-23