Table of Contents
Advertisement
USING SETUP MODE
5-30
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Options
Items
<BUFFER>
NONE
256BYTE
2KBYTE
8KBYTE
24KBYTE
32KBYTE
96KBYTE
128KBYT
<SENLEVL>
## %
Description
Assigns buffer memory to input data and
downloaded font data.
Print buffer
Download buffer
0 byte
128K bytes
256 bytes
127.75K bytes
2K bytes
126K bytes
8K bytes
120K bytes
24K bytes
104K bytes
32K bytes
96K bytes
96K bytes
32K bytes
128K bytes
0K bytes
NOTE:
0BYTE option is recommended only
for graphics application.
With 128KB selected, the printer cannot
accept any download font data.
120, 110, 100, 90, 80, 70 or 60 %
The threshold level of Photo Sensor for
Paper Edge Detection.
If output voltage of photo sensor is not
enough, threshold level should be lower so
that sensor can detect paper properly.
In general reasons of low voltage of sensor
output are as follows.
・Paper color is too dark.
・Preprint is on scanning area.
Note
The margin for strong light from outside
would be decreased, if you select threshold
level lower than 100% (90,80,70 or 60%).
User's Manual
Advertisement
Table of Contents
