Table of Contents
Advertisement
User's Manual
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Options
Items
<STANDBY>
## MIN
<INTRFCE>
PARALEL
SERIAL
USB
AUTO-2S
AUTO-4S
AUTO-6S
AUTO10S
AUTO15S
AUTO20S
USING SETUP MODE
Description
1, 3, 5, 10, 20 or 30 MIN
Time until shifting to the power saving mode
is set.
Selects the type of the interface to the
computer.
Centronics parallel interface
RS-232C serial interface
USB interface
Auto interface selection mode
Both interfaces are ready for
communication.
Specify the timing regarding the selected
interface as being inactive.
To switch the interface to the optional LAN
interface, mount the LAN card with the setup
mode set to "AUTO-XS" or "AUTOXXS"
under "INTERFCE," which in turn is under
"HARDWRE" The interface will
automatically switch to the optional LAN
interface.
To switch the interface to something other
than the optional LAN interface, do either of
the following:
To return the setup mode to
"INTERFCE" under "HARDWRE,"
remove the LAN card.
To switch the interface to a fixed
interface, set PARALEL,USB with the
LAN card mounted, and the setup mode
set to "INTERFCE" under
"HARDWRE."
5-31
Advertisement
Table of Contents
