Important Safety Notice - FujiFilm instax Pal User Manual

Problem Possible causes and solutions
Images were Even if the data saved in the camera and the
saved with film settings in the printer are different, the
different output will match the shape of the film on
shooting the printer ("mini" for mini Link 2, "SQUARE "
formats ("mini", film for SQUARE Link)� Before printing, adjust
"SQUARE", the position and size of the image data using
"WIDE") from the printer app�
the target
INSTAX Link
printer�
→ Can I print
images?
28

IMPORTANT SAFETY NOTICE

• Do not use this product and its accessories for a purpose other
than taking photos�
• This product has been designed with safety in mind, but please
read the following safety precautions carefully and then use the
product correctly�
• After reading the Quick Start Guide, be sure to keep it in an
easy-to-access place where you can refer to it whenever
necessary�
This symbol indicates danger, which could result in injury or death�
Please follow these instructions�
If one of the following cases occur, immediately unplug the
dedicated charging cable, turn the camera off and refrain from
any further use of the camera� Call the applicable Fujifilm
customer service center:
• If you notice anything abnormal, such as the camera (or
battery) becoming hot, emitting smoke or a burning smell�
• If you drop the camera and the outer shell is cracked or
damaged, or if for whatever reason the camera is exposed to
rain, snow, ice, water or other liquids, sand, dirt, dust, or other,
foreign objects�
Since the battery is installed in the camera, do not heat the
camera, throw the camera in a fire, drop the camera, or shake
the camera� The battery may rupture, causing injury�
Do not take flash photographs of people riding bicycles, driving
cars, skateboarding, riding horses, etc� The flash can be startling
and distracting to others, which can cause an accident�
Do not use this camera in places where there is flammable gas
or near open gasoline, benzine, paint thinner or other unstable
substances which can give off dangerous vapors� Use in these
environments could result in failure to do this could result in
explosion or fire�
Do not cover or wrap the camera in a cloth or blanket, and do
not leave the camera in a hot car or in direct sunlight� This can
cause heat to build up and distort the casing, cause the battery
to overheat, and/or cause a fire�
This indicates a matter that may lead to injury or physical damage
if ignored or incorrectly handled�
Never attempt to disassemble this product except at end of life
when and for the purpose of disposing of the battery�
If the camera is not functioning correctly, to avoid injury and to
ensure the Limited Product Warranty remains in effect, do not
attempt to repair it yourself� Contact Fujifilm's applicable
customer service / repair center�
If the camera is dropped and the outer cover opens, be careful
not to touch the inside of the camera� Injury may occur�
Do not handle this product with wet hands� Electric shock may
occur�
When the charging is completed, please unplug the dedicated
charging cable�
The PAL camera is intended for ages 13+� Keep the product out
of the reach of infants and small children� Injury may occur�
WARNING
CAUTION