Table of Contents
Advertisement
Problem
Possible causes and solutions
The image is
• Check to see if the lens has any fingerprints.
blurry.
If so, clean the lens.
• Make sure that the AF frame is green
before taking a photo.
• Make sure to hold the camera steady,
particularly in dark environments.
The camera
• There may be a temporary malfunction.
does not work
Please press the reset button. If it still does
properly.
not work properly, please contact the
applicable Fujifilm repair center for repair.
• The battery may not be charged. Charge
the camera.
The film pack
• Please use only FUJIFILM INSTAX MINI
does not load or
instant print film (INSTAX SQUARE™ or
does not load
INSTAX WIDE™ instant print film can not
smoothly.
be used).
• Align the yellow mark on the film pack
with the yellow camera alignment mark
and load it.
The film does
• The film may be misaligned due to shock
not unload.
such as vibration or dropping. Load a new
film pack.
• If the film is jammed, turn off the camera
and turn it on again. If the problem
persists, remove the jammed film and
then load a new film pack.
Some or all of
Do not open the film door until the film
the finished
is used up. If the film door is opened with
prints are white.
film remaining, the film is exposed and the
exposed area becomes white.
The print is
• Do not shake, bend, fold or hold the print
uneven.
immediately after it is printed.
• Do not obstruct the film ejection slot.
26
IMPORTANT SAFETY NOTICE
This product has been designed with safety in mind, and
to provide safe operation when handled correctly and in
accordance with the instructions in this User's Guide� It is
important that both the product and the INSTAX MINI instant
film pack are handled properly and used only to print photos
as instructed in this User's Guide and in the INSTAX MINI instant
film pack instructions� For your ease and safety, strictly follow
the instructions in this User's Guide� Keep this User's Guide in a
safe, convenient place for easy future reference as needed�
This symbol indicates danger, which could result in product
damage, injury or death. Follow the instructions indicated to avoid
damage to the camera or injury.
If one of the following cases occur, immediately unplug the
supplied dedicated Type-C Charging Cable, turn the camera
off and refrain from any further use of the camera:
• The camera becomes hot, emits smoke, has a burnt smell, or
otherwise seems abnormal�
• The camera is dropped into water, or foreign objects like
water, sand, dirt or metal get inside the camera�
The camera has a built-in lithium battery� Do not subject
it to heat, expose it to an open flame, drop it, or otherwise
apply force or impact to it� Doing so may cause the camera to
explode, resulting in injury�
Never attempt to take this product apart. You may be injured.
All repairs should be handled solely by Fujifilm. Injury may result
from attempts to self-assess or repair this camera.
If this product is dropped or damaged so that the outer case
becomes cracked or open, do not touch it. Contact Fujifilm.
Do not touch any parts which are inside the film door. You may
be injured.
Never get this product wet or handle it with wet hands. Doing
so may result in electric shock and injury.
Promptly unplug the supplied dedicated Type-C Charging Cable
once battery is fully charged.
Keep out of the reach of small children. This product could
cause injury in the hands of a child.
Do not cover or wrap the camera or the AC power adapter in a
cloth or blanket, or otherwise place the camera in the sun or an
environment where heat may build up. This could distort the
casing or cause a fire.
The "CE" mark certifies that this product satisfies the
requirements of the EU (European Union) regarding
safety, public health, environment and consumer
protection. ("CE" is the abbreviation of Conformité
Européenne.)
WARNING
WARNING
WARNING
Advertisement
Table of Contents
