Roland RD-600 Owner's Manual page 33

Making fine adjustments to the pitch (Fine Tune)
This setting lets you make extremely fine adjustments to the pitch, in steps of 1/100th of a semi-
tone.
Pressing the [INC/YES] button will raise the pitch, and pressing the [DEC/NO] button will
lower the pitch.
If a TX part Tone is selected, you can simultaneously press the [INC/ YES] [DEC/NO] buttons
to turn this setting OFF, so that Fine Tune messages will no longer be transmitted from MIDI
OUT. To restore the original setting, press the [INC/ YES] or [DEC/NO] button.
Sh Concerkh Let4e
Adjusting the depth of reverb that is applied to a Tone (Reverb Amount)
This sets the depth of the reverb effect.
If a TX part Tone is selected, you can simultaneously press the [INC/ YES] [DEC/NO] buttons
to turn this setting OFF, so that Reverb Amount message will no longer be transmitted from
MIDI OUT. To restore the original setting, press the [INC/ YES] or [DEC/ NO] button.
If the Reverb Amount is set to 0, there will be no effect even if reverb is turned on. In this case,
the [REVERB] button indicator will blink.
TReverb Arourtk
Range of values: INT: 0-127, TX: OFF, 0-127
SL. Corcert LrRiaG
Adjusting the depth of chorus that is applied to a Tone (Chorus Amount)
This sets the depth of the chorus effect.
If a TX part Tone is selected, you can simultaneously press the [INC /YES]/[DEC/NO] buttons
to turn this setting OFF, so that Chorus Amount message will no longer be transmitted from
MIDI OUT. To restore the original setting, press the [INC/ YES] or [DEC/NO] button.
If the Chorus Amount is set to 0, there will be no effect even if chorus is turned on. In this case,
the [CHORUS] button indicator will blink.
TChsrus Arourt +
Range of values: INT: 0-127, TX: OFF, 0-127
St.Concert Le1er
Bend Range settings
You can specify the amount (upper limit / lower limit) of pitch change that will occur when the
bender is operated or when Pitch Bend messages are received via MIDI.
For INT part Tones, the upper limit and lower limit can be specified independently.
* This has no effect when a Rhythm Set (B86, B87, B88) is selected.
Bend Range Up
This sets the maximum pitch change that will occur when the bender is moved toward the
right.
TBend Range Up +
Range of values: 0— +12
SL. Concert Let+iz
Bend Range Down
This sets the maximum pitch change that will occur when the bender is moved toward the left.
eek Sar ypae Laney, ae
TBendRangebour
Range of values: -48-0
33