Dividing The Keyboard (Split) - Roland RD-600 Owner's Manual

16
2. Assign Soft Pad (A62) to the INT LOWER part.
PART SELECT
LOWFR ARR UPPER LOWER ES — UPPER
pai LC
GROUP
A rSETUP B
Cape Ce)
INTERNAL TONE CATEGORY
PIANO 1 PIANO 2 E.PIANO ORGAN STRINGS PAD BASS/LEAD CLAV/MALLET
1 2 3 4 5 6 2b) 7 8
, = eae TONE RASS . ' .
=
=) ey i at fh Rise If call Ui Al
a. Double-click the INT LOWER part select button to make the indicator light. The INT LOWER
part switch will also light, and the other part switches will go dark. The indicator will be green
for both buttons. The group / category / variation button indicators will also light green.
b. Press GROUP [A] / CATEGORY [PAD] / VARIATION [2] to make the corresponding indica-
tors light. Make sure that the lower line of the display is as shown in the figure.
Soft Pad has now been assigned to the INT LOWER part.
BS2thiarrm Vibes
Hee Soft Pad Selected Tone
3. Press the INT UPPER part switches so that the indicators of both the INT UPPER and the
LOWER part switches are lit.
meme
LOWERIMEHUPPER «= LOWER-SES-UPPER
—_ =
TONE
MODIFY
Ligh
L_— wea i =}
ATTACK DECAY RELEASE Bright ——!
PART SWITCH/LEVEL
Play the keyboard, and the two Tones will sound as a layer.
Dividing the keyboard (Split)
Now let's split the E.Organ 3 (A43) and Ac.Bass (A74) Tones across the keyboard.
1. Press the [SPLIT] button. The indicators of the INT UPPER and INT LOWER part switches will
light, and the keyboard will be divided into two ranges (the UPPER part is the high range, and
the LOWER part is the low range). You will be able to play different Tones with the left hand
and right hand.
2. Assign E.Organ 3 (A43) to the INT UPPER part.
PART SELECT
GROUP
LOWER {i UPPER LOWER —-BES— UPPER A rSETUP= B
Qa) INTERNAL TONE CATEGORY eb
PIANO 4 PIANO 2 E.PIANO ORGAN STRINGS PAD BASS/LEAD CLAV/MALLET
Sel ey occ ai) he
1 2 3 4 5 6 7 8
INTERNAL ; [WE VARIATION
1 2 3 4 5 6 7 8
COI Cet CoC
a. Press the INT UPPER part select button to make the indicator light.
b. Press GROUP [A] / CATEGORY [ORGAN] / VARIATION [3] to make the corresponding indi-
cators light. Make sure that the upper line of the display is as shown in the figure.