Removal And Replacement Of Water Valve - Hoshizaki KM-280MAF-E Service Manual

12. REMOVAL AND REPLACEMENT OF WATER VALVE

1) Turn off the power supply. Unplug the icemaker.
2) Close the Water Supply Line Shut-off Valve.
3) Remove the Top and Front Panels.
4) Remove the Valve Outlet Tubing by releasing the Clamp.
5) Remove the Bracket from the unit.
6) Remove the Fitting Nut and Water Valve. (Do not lose the packing/gasket.)
7) Disconnect the Terminals from the Water Valve.
8) Install the new Water Valve, and replace the removed parts in the reverse order of
which they were removed.
9) Open the Water Supply Line Shut-off Valve.
10) Plug in the icemaker. Turn on the power supply.
11) Check for leaks.
12) Refit the Top and Front Panels in their correct positions.
72