Using the Mid–Size Weight Kit
A weight kit is available for this machine. This kit is
optional and can be obtain from an Authorized Service
Dealer
The weight kit mounted in the front position is
required when a Tru–Trak Sulky is installed.
The weight kit mounted in the back position is
optional when a Tru–Trak Sulky is not installed
(Fig. 22).
Installing this weight kit can improve performance on
slopes without the Tru–Trak Sulky.
1
3
2
Figure 22
1. Weight mounted in rear
position
2. Capscrew
4
3. Washer
4. Nut
25