Setup; Loose Parts - Toro 30434 Operator's Manual

Setup

Note: Determine the left and right sides of the machine
from the normal operating position.

Loose Parts

Note: Use the chart below to verify all parts have been shipped.
Step Description
Handle assembly
1
Flanged bolt 3/8 x 1 inch
Flanged bolt 3/8 x 1–1/4 inch
Flange nut 3/8 inch
Fuel tank with studs installed
Bolt, 5/16 x 7/8 inch
2
Lock washer, 5/16 inch
Washer, 5/16 inch
Spring
Hose clamp
3
E–ring
4
Cotter pin
Washer
5
Hairpin cotter pin
6
No parts needed
7
No parts needed
8
No parts needed
Oil drain hose
Operator's Manual
9
Engine Operator's Manual
Parts Catalog
Registration card
Qty. Use
1
2
Installing the handle assembly
2
4
1
2
2
Installing the fuel tank
4
2
1
2 Installing the control rods
1
Installing the speed control rod
1
Installing the hairpin cotter pins and
2
washers
Checking the tire pressure
Checking the hydraulic fluid and engine
1
oil
1 Setting up the hydro control linkage
1 Use for draining engine oil
1 Read before operating machine
1 Read before operating machine
1
1 Fill out and return to Toro
13