Table of Contents
Advertisement
Service and maintenance
10.1
Service and maintenance
Cleaning the device
The device is designed for low-maintenance operation. Nevertheless, you must regularly clean
the device.
Note
Switch the device off for cleaning
Clean the device only when it is switched off.
For cleaning, use a soft cloth moistened either with water or a mild cleaning agent. Use only
dishwashing detergent or foaming detergent.
Procedure
Spray the cleaning agent on to a cleaning cloth. Never use caustic solvents or abrasive
cleaners.
Note
Avoid damage
Do not clean the device using compressed air or steam jets because they can damage it.
Checking the device
In order to prevent foreign bodies or liquids entering the device, regularly check the device for
the following:
• Ensure that all the housing screws are in place and tight
• For damage to the housing
• For damage to the cable cover or cable entry
Protect the device from environmental effects
Protect the device against the following environmental factors:
• Direct sunshine and heat sources
• Mechanical vibration and shock
• Dust
NCU 1750
Equipment Manual, 10/2023, A5E45627807B AH
10
95
Advertisement
Table of Contents
