Lexmark ST9817 User Manual page 39

Understanding the printer menus
Menu item
Auto CR after LF
Off*
On
Auto LF after CR
Off*
On
Tray Renumber
Assign MP Feeder
Assign Tray [x]
Assign Manual Paper
Assign Manual Envelope
Tray Renumber
View Factory Defaults
Tray Renumber
Restore Defaults
Print Timeout
Off
On* (90)
Note: An asterisk (*) next to a value indicates the factory default setting.
HTML
Menu item
Font Name
[List of fonts] (Times*)
Font Size
1–255 (12*)
Scale
1–400% (100*)
Orientation
Portrait*
Landscape
Margin Size
8–255 mm (19*)
Backgrounds
Do Not Print
Print*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to perform a carriage return after a line feed control
command.
Note: Carriage return is a mechanism that commands the printer to move
the position of the cursor to the first position on the same line.
Set the printer to perform a line feed after a carriage return control
command.
Configure the printer to work with a different print driver or custom
application that uses a different set of source assignments to request a
given paper source.
Choose from the following options:
0–199—A numeric value to assign a custom value to a paper source.
200—The printer uses the factory default paper source assignments.
201—The paper source ignores the Select Paper Feed command.
Show the factory default value assigned for each paper source.
Restore the tray renumber values to their factory defaults.
Set the printer to end a print job after it has been idle for the specified
amount of time in seconds.
Description
Set the font to use for HTML documents.
Set the font size to use for HTML documents.
Scale HTML documents.
Set the page orientation for HTML documents.
Set the page margin for HTML documents.
Print background information or graphics for HTML documents.
38