Electronic Graphic Equalizer; Dsp Surround - Aiwa AV-X300 Operating Instructions Manual

ELECTRONIC GRAPHIC
EQUALIZER
This unit provides the following five different equalization modes.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
JAZZ: Accented lower frequencies for jazz-type music
CLASSIC: Enriched sound with heavy bass and fine treble
BGM: Calm tone with suppressed bass and treble
Press one of the GEQ (Graphic Equalizer) buttons.
The selected mode name appears on the display for two seconds,
and the selected mode remains lighting on the display.
Selected GEQ mode
To cancel the selected mode
Press the selected button again. "GEQ oFF" appears on the
display,
To select with the remote control
Press the GEQ button repeatedly until the desired equalization
mode is displayed.
DSP SURROUND
DSP DOWNY UPA
MANUAL SELECT DSP
The DSP (Digital Signal Processor) surround circuits can recreate
the effect of sounds reflected from walls or ceilings, to obtain
the sound presence of real environments. There are four modes
with matching graphic equalization modes. Equalization modes
are selected automatically and can also be selected or turned
off to suit your preference.
Press one of the DSP buttons (DANCE, LIVE, HALL or
ARENA).
The selected mode name appears on the display for two seconds,
and the selected DSP and matching GEQ modes remain lighting
on the display.
Selected DSP mode Matching GEQ mode
= SE
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. Whem DANCE,
HALL or ARENA is selected, no sound will be heard from the
surround speakers.
To cancel the selected mode
Press the selected button again. "DSP-oFF" appears on the
display. Even if canceling the selected DSP mode, the matching
or selected GEQ mode still remains. While the DSP surround
system is off, no sound is heard from the surround speakers.
To select with the remote control
Press the DSP button repeatedly until the desired DSF mode is
displayed.
To adjust the volume of the surround speake's
Press the MANUAL SELECT button once. "SUR" i displayed
for four seconds. Press the UPA or DOWNY button yhile "SUR"
is displayed.
Note that the Dolby Pro Logic surround speakers kvyel is also
changed (see page 19).
The DSP system is automatically canceled when hee DOLBY
PRO LOGIC is turned on.
NaGLisH 8