Electronic Graphic Equalizer - Aiwa AV-D55 Operating Instructions Manual

ELECTRONIC GRAPHIC
EQUALIZER
Press the GEQ (Graphic Equalizer) button, and turn the
MULTI JOG until the desired equalization mode is displayed.
The GEQ modes are displayed cyclically as follows.
Selected mode
SETTING NEW EQUALIZATION CURVES
I.e-.
I
[a
2 Press the DOWN or UP button to select a
frequency.
The level indicator of the selected frequency flashes.
3 Turn the MULTI JOG to adjust the level of the
selected frequency.
4 Repeat steps 2 and 3 to make the desired
equalization curve.
5 Within 8 seconds, press the ENTER button.
6 Turn the MULTI JOG to select a preset number
from Ml to M4.
7 Press the ENTER button.
To adjust the GEQ curve temporarily
To select the manual preset curve
Press the GEQ button, and turn the MULTI JOG until the desired
9 ENGLISH