Hammer Safety Warnings - Parkside PKHAP 20-Li C3 Original Instructions Manual

GB
packs may create a risk of injury and
fire.
c) When battery pack is not in
use, keep it away from other
metal objects, like paper clips,
coins, keys, nails, screws or
other small metal objects, that
can make a connection from
one terminal to another. Short-
ing the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, li-
quid may be ejected from the
battery; avoid contact. If con-
tact accidentally occurs, flush
with water. If liquid contacts
eyes, additionally seek medical
help. Liquid ejected from the battery
may cause irritation or burns.
e) Do not use a battery pack or
tool that is damaged or modi-
fied. Damaged or modified batteries
may exhibit unpredictable behaviour
resulting in fire, explosion or risk of in-
jury.
f) Do not expose a battery pack
or tool to fire or excessive tem-
perature. Exposure to fire or temper-
ature above 130 °C may cause explo-
sion.
g) Follow all charging instructions
and do not charge the battery
pack or tool outside the tem-
perature range specified in the
instructions. Charging improperly
or at temperatures outside the spe-
cified range may damage the battery
and increase the risk of fire.
6. SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
30
b) Never service damaged bat-
tery packs. Service of battery packs
should only be performed by the man-
ufacturer or authorized service pro-
viders.

Hammer Safety Warnings

Safety instructions for all
operations
• Wear ear protectors. Exposure to
noise can cause hearing loss.
• Use the auxiliary handle(s), if
supplied with the tool. Loss of
control can cause personal injury.
• Hold the power tool by the in-
sulated gripping surfaces when
performing work in which the
drilling tool may come into con-
tact with hidden wiring. Con-
tact with a live wire can also cause a
charge in metal parts of the tool and
result in an electric shock.
Safety information for using long
drills with hammer drills
• Always begin drilling at a low
speed and when the drilling
tool is in contact with the work-
piece. Higher speeds can cause the
drill to bend slightly when rotating
freely without contact with the work-
piece and can also cause injury.
• Do not apply excessive pres-
sure to the drill. Only apply
pressure lengthwise along the
drill. Drills can bend and break or
cause a loss in control, thus resulting in
injuries.
Additional safety instructions
• Secure the workpiece. A work-
piece clamped with clamping devices
or in a vice is held more secure than by
hand.