Advertisement
Operation
Operation
10. Perform the open compensation described in the instrument's operation
manual.
11. Inserting a sample components in the V-mount center section (between fixture
jaws).
12. Releasing the lever C to fix the DUT.
Figure 1-4
WARNING
DO NOT APPLY MORE THAN ± 40V OF DC BIAS VOLTAGE TO THE
UNKNOWN TERMINALS. AN ELECTRICAL SHOCK HAZARD WILL
EXIST DURING OPERATION WHEN THE DC BIAS VOLTAGE IS
GREATER THAN ± 40V DC.
12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 1
Advertisement
