Electrolux EB4GL90KCN User Manual page 12

6.4 Setting the Combi function
1. Remove microwave bottom glass plate.
2. Turn on a heating function.
3. Press and do the same steps as when
you set the Microwave function.
When you use the Microwave function in
Combi mode the Microwave power cannot be
more than 600 W.
For some functions the microwave will
start as soon as the set temperature is
reached.
Functions not available for the Combi
function: Favourites, End Time, Set + Go,
Heat + Hold.
6.5 Setting the Microwave Quick
Start function
1. If necessary, press
oven.
2. Press to turn on the Quick Start
function.
Each press of adds 30 seconds to the
Duration time.
You can change the microwave power
(refer to "Setting the Microwave
function").
3. Press to set the time for the function:
Duration. Refer to "Clock functions"
chapter, Setting the clock functions.
6.6 Heat-up indicator
When you turn on a heating function, the bar
shows that the temperature increases. When
temperature is reached the signal sounds 3
times, the bar flashes and disappears.
6.7 Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
12 ENGLISH
to turn off the
6.8 The menus in overview
Main menu
Symbol / Menu
item
Heating Functions
Recipes
Favourites
Basic Settings
Specials
Submenu for: Basic Settings
Symbol / Menu
item
Set Time of Day
Time Indication
Set + Go
Heat + Hold
Time Extension
Display Contrast
Display Brightness
Set Language
Buzzer Volume
Application
Contains a list of heating
functions.
Contains a list of automatic
programmes.
Contains a list of favourite
cooking programmes created
by the user.
Used to set the appliance
configuration.
Contains a list of additional
heating functions.
Description
Sets the current time on the
clock.
When ON, the display shows
the current time when you
deactivate the appliance.
To set a function and activate
it later with a press of any
symbol on the control panel.
Keeps the prepared food
warm for 30 minutes after a
cooking cycle finished.
Activates and deactivates the
time extension function.
Adjusts the display contrast
by degrees.
Adjusts the display bright‐
ness by degrees.
Sets the language for the dis‐
play.
Adjusts the volume of press-
tones and signals by de‐
grees.