Roland RD-1000 Owner's Manual page 8

e.g.) Selecting the sound of Voice 3 (Piano
3) in Bank 7
@) Push the Voice Selector Button 3.
VOICE SELECTOR WRITE
juan Qo fama co ca :
a PE [25] (Es ay}
7 8 BANK PROGRAM 1 2
CHANGE
Push the Voice Selector 3
The Display responds with:
@ While holding the Bank Button down, press
the Voice Selector Button 7. This procedure
selects the Bank 7.
= = = a = = = WRITE
9 mf a SC
@® ®
@ While holding the
Bank Button
@ Push the Voice
Selector 7.
The Piano 3 of Bank 7 is selected.
1) Voice Preserve Function
The RD-1000 features the Voice Preserve function,
that is, while you are playing the keyboard using a
certain voice, you can assign the next voice to be
used, without changing the sounds until you
release all the keys.
Even if you select a new voice while playing the
keyboard or Damper ON, the sound does not
change. (The Voice Indicator of the corresponding
voice.) To actually change the sounds, release all
the keys on the keybaord and turn the Damper
off. (Now, the Voice indicator of the new voice
glows steadily.)
e.g.) Changing from Piano 1 to Clavi
@ While playing the keyboard, push the Voice
Selector 5 (Bank-1/Clavi).
The inidcator of the Voice 5 (Clavi) flashes. The
Piano 1 still remains.
[=e — al | SS eS =e
CSS) a Ee a) ea Cet aa be
PROGRAM 1 BANK
The indicator of the Voice
Selector 5 flashes.
@ When you wish to change to Clavi, release ail
the keys and turn the Damper off.
The indicator of Voice 5 stops flashing and glows
steadily.
VOICE SELECTOR WRITE
co [ae] o ot - jam] a ca
PROGRAM y 2
CHANGE
The flashing indicator
now glows steadily
The Voice Preserve function works on the sounds
which are selected by the MIDI program change
messages sent from the external device.