Table of Contents
Advertisement
2. How to connect the Pedal
Unit to the Main Unit
The Pedal Unit is a damper pedal and a soft pedal
;
@ Connect the cable of the Pedal Unit to the
with a built-in power supply unit. That is, the
Cable Socket on the rear panel of the RD-1000.
RD-1000 does not operate without the Pedal Unit
connected.
Tighten the Ring
To disconnect the Pedal Unit, take the revese pro-
cedure with the RD-1000 turned off.
3. How to setup the amplifier
The Output Level Switch @) does not work on the
balanced output (XLR Output Connectors @) but
on the unbalanced output (Output Jacks @).
AUX IN \
L LINE IN
Amplifier
Advertisement
Table of Contents
