Change Channel Settings - Philips 32PFL7605C User Manual


[PC mode]: Enabled by default if you
select [Computer] in the home menu.
If enabled, you can select [Picture
format] > [Unscaled] which provides
maximum detail for display of PC
content. If a PC is connected via HDMI
or VGA, this option is enabled by
default.

[Light sensor]: Enables dynamic
adjustment of the screen display to
match lighting conditions.

[Picture format]: Changes the picture
format.

[Screen edges]: Changes the picture
size.

[Picture shift]: Adjusts the position of
the picture. Not applicable if selected
picture format is [Auto zoom] or
[Wide screen].
Smart sound settings
Use the [Smart sound] experience menu to
access frequently used sound settings.
1. While watching TV, press
2. Select [Smart sound], then select one of
the following settings:

[Personal]: Sets the TV to your
personal preferences set in the [Sound]
menus in [Setup].

[Standard]: Adjusts sound settings to
suit most environments and types of
audio.

[News]: Applies sound settings ideally
suited for spoken audio, such as the
news.

[Movie]: Applies sound settings ideally
suited for movies.

[Game]: Ideal settings for gaming.

[Drama]: Applies sound settings ideally
suited for drama.

[Sports]: Applies sound settings ideally
suited for sports.
3. Press OK to confirm your choice.
4. Press to exit.
More sound settings
NonPu blish
1. Press .
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
.
3. Select a setting to adjust:

[Smart sound]: Accesses pre-defined
smart sound settings.

[Reset]: Resets to factory default
settings.

[Bass]: Adjusts the bass level.

[Treble]: Adjusts the treble level.

[Surround]: Enables spatial sound.

[Headphones volume]: Adjusts
headphone volume.

[Auto volume leveling]: Automatically
reduces sudden volume changes, for
example, when switching channels.

[Balance]: Adjusts the balance of the
left and right speakers to best suit your
listening position.
Reset to factory settings
NonPu blish
Resetting your TV to factory settings
restores default picture and sound settings.
Channel installation settings remain the
same.
1. While watching TV, press
2. Select [Setup] > [TV settings] > [Factory
settings], then press OK.
TV settings are reset back to the factory
default.
Start a TV demo
NonPu blish
Start a demo to find out more about your
TV's features.
Note: Demos are not supported on MHEG
channels.
1. While watching TV, press
2. Select [Setup] > [Watch demos], then
press OK.
3. Select a demo, then press OK.
4. Press to exit the demo.

Change channel settings

Reorder channels
NonPu blish
After installation, you may want to reorder
the channel list to suit your preference.
1. While watching TV, press
2. Select [Channel list], then press OK.
.
.
.
EN 35