Use A Cam; Insert Sd Card - Philips 32PFL7605C User Manual

Use a CAM

Insert and activate a CAM
NonPu blish
Caution: Be sure to follow the instructions
described below. Incorrect insertion of a
Conditional Access Module (CAM) may
damage both the CAM and your TV.
Notes:

This TV supports CI as well as CI+. CI+
allows service providers to offer
premium HD digital programmes with a
high level of copy protection.

Refer to the documentation from your
service operator on how to insert a
smart card into the Conditional Access
Module.
1. Switch off the TV.
2. Follow the directions printed on the CAM
and insert the CAM into the Common
Interface at the side of the TV.
3. Push the CAM in as far as it will go and
wait for the CAM to be activated. This may
take several minutes. Do not remove the
CAM from the slot when in use as digital
services will be deactivated.
Access CAM services
NonPu blish
1. After inserting and activating the CAM,
press .
2. Select [Common interface], then press
OK.
3. Select the CAM provider and press OK.
Watching a CAM service
If a CAM is inserted and subscription fees
are paid, the TV shows the programme from
the digital TV service provider. The
applications, functions, content and
on-screen messages vary by CAM service.

Insert SD card

Memory size
NonPu blish
To download rented videos from Net TV,
insert an SD memory card into the TV SD
card slot. Once formatted, leave the card
permanently in the slot.
SD memory size
Use a blank SD memory card.The SD card
should have a minimum storage capacity of
4 GB. For high-definition video, ensure that
you use an SD card with at least 8 GB of
storage capacity.
Caution: Ensure that you follow the
instructions described in Connect the TV >
Insert SD card > Insert and format (Page
63). Incorrect insertion of the SD card may
damage your SD card. All existing content
on the SD card will be erased prior to the
downloading of rented videos.
Note: This TV has a standard SD card slot
and the SD card is solely for use in Video
store.
Insert and format
1. Switch on the TV.
2. Before you insert the SD memory card,
remove the Conditional Access Module
from the TV.
3. Insert the SD memory card with its front
label facing out into the SD card slot. The TV
will automatically start formatting.
EN 63