Switch On Settings; Channel Settings; Feature Settings - Philips HFL4014/12 Series Professional Installation Manual

6.4 Switch on settings

6.4.1

Channel Settings

6.4.2

Feature Settings

Note: TV will stop the upgrade
if TV would be woken up by the
guest during the upgrade
o Navigate to the [Switch On Settings]
menu, you will see the screen on the left
o In this menu you will be able to set all
Switch on settings, these are the menu
items that a guest can change, the values
you set here are the settings applied when
the guest wakes up the TV
o Navigate to the [Channel Settings] [Switch
On Channel Filter] menu
o You will see a list of channel filters, your
selection will be the default selected
channel filter when opening the channel
list
o This list also contains the theme's
o The channel list you have selected will also
be shown in the recommended screen in
the dashboard
Note: The list you see in the screenshot is
depending on the installed content
o Navigate to the [Channel Settings] [Switch
On Channel] menu
o You will see a list of channels followed by
the external sources
Note: The list you see in the screenshot is
depending on the installed channels
o Select the channel or source you would
like to set as Switch On Channel
o Navigate to the [Feature Settings] [Switch
On Feature] menu
o You will see below items:
o [None]: The dashboard or apps will
NOT be opened when starting up the
TV
o [Dashboard]: The dashboard will be
opened when starting up the TV
o [SmartInfo]: SmartInfo will be opened
when starting up the TV
- 27 -