Use Subtitles - Philips 32PFL7605C User Manual

3. Press the Navigation buttons to set the
sleeptimer. The sleeptimer can be set up to
180 minutes, in steps of five minutes. The
sleeptimer is switched off if it is set to zero
minutes.
4. Press OK to activate the sleep timer. The
TV switches to standby after the set period
of time.
Child lock
To prevent children from watching TV, you
can lock the TV or block age-rated
programmes.
Set or change the child lock code
1. Press .
2. Select [Setup] > [Channel settings] >
[Child lock].
3. Select [Set code] or [Change code].
4. Enter the code with the Numeric
buttons.
Tip: If you forget your code, enter '8888' to
override any existing codes.
NonPu blish
Lock or unlock channels
1. In the child lock menu, select [Channel
lock].
2. Enter the child lock code with the
Numeric buttons. The [Channel lock] menu
appears.
3. Select channels to lock or unlock.
Parental rating
NonPu blish
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with
age ratings higher than your child's age.
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Child lock] >
[Parental rating]. A message appears
prompting you to enter the child lock code.
3. Enter the child lock code with the
Numeric buttons.
4. Select an age rating, then press OK. All
programmes beyond the selected age rating
are blocked.
EN 30
For information on child lock codes, see Use
more of your TV > Use timers and locks >
Child lock (Page 30).

Use subtitles

On analogue channels
NonPu blish
1. Switch the TV to an analogue TV channel.
, then select [Text] and press
2. Press
OK.
3. Enter the three number page number of
the subtitles page (usually '888').
4. Press to exit teletext. Subtitles display if
available.
On digital channels
NonPu blish
Not supported on MHEG channels.
1. Press .
2. In the menu that appears, select [Off],
[On] or [On during mute], then press OK.
Note: With [On during mute], the TV
displays subtitles only when the sound is
muted with .
Subtitle language
NonPu blish
This feature is only supported on selected
digital channels.
1. While watching TV, press
2. Select [Subtitle language].
3. Select a subtitle language from the list,
then press OK.
Note: More information about language
settings is available in Set up the TV >
Change language settings > Audio, Subtitle,
Teletext languages (Page 38).
.