Watch A Connected Device; Use Ambilight - Philips 32PFL7605C User Manual

2. Select a picture format, then press OK to
confirm.
Note: You can access picture formats via the
and the [Setup] menu.
experience menu
The following picture formats can be
selected:

[Auto fill]: Adjusts the picture to fill the
screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.

[Auto zoom]: Enlarges the picture to fill
the screen. Recommended for minimal
screen distortion but not for HD or PC.

[Super zoom]: Removes the black bars
on the sides of 4:3 broadcasts. Not
recommended for HD or PC.

[Movie expand 16:9]: Scales the classic
4:3 format to 16:9. Not recommended
for HD or PC.

[Wide screen]: Stretches the classic 4:3
format to 16:9.

[Unscaled]: Provides maximum detail
for PC. Only available when [PC mode]
is enabled in the [Picture] menu.
Notes:

Depending on the picture source, some
picture formats are not available and
will not be seen on-screen.

Watch a connected device

Add new device
NonPu blish
Notes:

Before watching a connected device,
you must add it to the home menu.

HDMI ARC compliant devices
connected to the HDMI ARC
connector on the TV are automatically
added to the home menu.
1. Connect and switch on the device.
2. Press .
3. Select [Add your devices], then press
OK. Follow the on-screen instructions.
Watch connected device
NonPu blish
1. Press .
2. Select the device from the home menu.
3. Press OK to confirm your choice.

Use Ambilight

Switch on Ambilight
NonPu blish
Enjoy a more relaxed viewing experience
and improved perceived picture quality. Dim
the lighting conditions in the room for the
best Ambilight effect.
Caution
To avoid bad infrared remote control
reception, place your devices out of sight of
Ambilight.
1. Press (Experience).
2. Select [Ambilight], then press OK.
3. To switch Ambilight on or off, select [On]
or [Off].
You can also press
Ambilight on or off.
Set up Ambilight
NonPu blish
In the Ambilight menu, you can access more
Ambilight settings.
While watching TV, press
[TV settings] > [Ambilight].
Select a setting to adjust:

[Dynamic]: Adjusts Ambilight between
relaxed and dynamic levels. Available
only if Ambilight [Colour] is set to
[Dynamic].
on the TV to switch
> [Setup] >
EN 21