Alpine Ai-NET CHA-1214 Service Manual page 40

DW SERIES |
3. Slide lack disassembly and assembly methods 3. ADL KF 77IODR : MAK
(1) Remove 2 screws @ and remove bracket. (Refer to (1)2RDAYVOEAL. FIT hEMLETF,
Figures 2, 2-1.) (2, 2-1 Ra)
And the slide lack will be removed with the lack gear LEC. AFT RAY TAD y PEP PAU EARS
attached. CANET.
< Assembly notes > <#AIZ EDIE >
@ Perform the slide lack mounting before item 2 @ A257 FF7Y IRV SBBQ2D FST KRU,
bracket and gear mounting is carried out. EP ERY HY SARMICTTo TR AU,
<Figure 2>
Slide, <oBl>
Rack
Stud (B) @® Bracket, Rack Rack, Gear ®
Bracket, Gear
©
Elevator motor assembly Washer (A)
Gear, Elevator @
<Figure 2-1 >
<2-1]>
Gear, idle
Wheel, Gear
<Figure 2-2>
<2-28I>