Alpine Ai-NET CHA-1214 Service Manual page 39

| DW SERIES
Disassembly, Assembly and Replacement of Function Parts
MERE RBanO DHF ° HAI RURBAE
1. Chassis top disassembly and assembly methods
(1) Remove 1 spring (A). (Refer to Figure 1-1)
(2) Remove 8 screws ©. (Refer to Figures 1, 3, 4.)
And the chassis top assembly will be removed.
<Assembly notes >
@ Insert stopper tray onto slot of chassis top assembly
and then mount spring (A).
@ Always mount screws in order of X17 K2-> 3K
4— % 5 K6 3K 7 KB.
Spring (A)
x7D
xKBO
Chassis top assembly
1. Ye-Dbhy PHOS + MIA
(AIBADATULYT (A) CAHALEF. (1-1 Ske)
(2)8RDRVORALET. (1. 3, 4B RR)
WEE. LHD hy SHIUNANET.
<A ENIFR>
@ Vv LV hy FHUEOBICA hy IN—bhUT ERA
LTPHAFULYTD (A) EMAWET.
@ AVILDS K1 > K2> K3B> K 4 KH KG KT >
X8O MII ERY) Flt TK SU,
Stopper, Tray
<Figure 1-1>
<1-18>
Ox1
<Figure 1>
<1i>
Chassis frame assembly
2. Bracket gear, elevator gear, idle gear, wheel gear
replacement method
(1) Remove 5 screws @ and take out bracket gear.
(Refer to Figure 2-1.)
(2) Pull out elevator gear after removal of bracket gear.
(Refer to Figure 2-1.)
(3) Remove washer (A) and put out wheel gear and idle
gear in this order. (Refer to Figure 2-2.)
<Assembly notes >
@ When mounting elevator gear, idle gear, wheel gear,
check engaging status of each gear.
Always mount screws @ in order of 92K 10—%
11-3 12% 13.
Do not use the washers used once when
assembling.
When mounting washer, take care the washer is not
deformed or damaged.
2 FIT y h¥EVPSLIVN—-B-¥P SPIT FIVE
PSR —-WVEP ORBAR
(15SRORVORAL. FIT y KX PV ERMUOALE TF.
(2-1 BOS RR)
(QFIF y h¥EPEALEER, LLN-2—-¥P 4
SREET. (2-1M SR)
(3) Dy va (A) EAL. KI-WEP. PT KI
FP OMICS REET. (2-2 6MBRR)
<A EOS >
@ LLN-2-FPS PT EN EP SARA NEP
BUY) hE, BYP OMA CHHBL TR Shion
@ RLVOMSDSF KOK 10 3K 11 3K 12> K 13.018
(CRU ATR SU,
@ —R@ARLEDy + —lt, ABI IAR UG
WEFAU,
@ Dy + —RM) tin, ORE. OC NOG
IJEBLTR SU