Pentax ZOOM 105-R Operating Manual page 40

EXPOSURE COMPENSATION
Exposure compensation is an adjustment to brighten or
darken the whole picture when shot in high-contrast
lighting conditions. Use the position for situations
with bright backgrounds, or the ^ position for
situations where the central subject is too brightly lit from
the front This compensation can be used in combination
with various exposure settings.
Notes:
• Exposure compensation does not work m the Bulb
Bulb-Sync or Bulb-Timer mode
• To confirm the compensation value, depress the black
SETTING button for approx 3 seconds
tKtUSSM
/
N
la
1
/
Setting exposure compensation:
To set the compensation value, do so m the Auto Single-
Frame Shooting mode II the black SETTING button is
depressed for approx 3 sec or more, the exposure
compensation mark ( ^ | will be indicated Exposure
compensation is possible in the range from to 3EV
in gradations of 0 5EV While the black SETTING button is
depressed, move the zooming lever left (
1
or right
I ♦ I to obtain the desired compensation value
The exposure compensation mark, either or ^
appears on the LCD panel, indicating that exposure
compensation is activated
• Once exposure compensation is set, the compensated
value will be held m memory until the film is replaced
To cancel exposure correction, reset the corrected
value to ^ 0