Pentax ZOOM 105-R Operating Manual page 35

Shooting procedure (for double exposure)
1. Press the blue drive button, so the multi-exposure mark
( ® ) appears on the LCD panel.
2. Press the shutter release button to shoot an initial
exposure. The film will not advance. The film advance
mark (Q_) flickers on the LCD panel to indicate
that Multi-Exposure Shooting is in progress.
3. Recompose the frame, and press the shutter release
button to shoot the second exposure. (After the second
shot, the film will automatically advance, and Single-
Frame Shooting mode will be restored).
To expose more than twice:
Activate the Multi-Exposure mark before pressing the
shutter release button for the second exposure, and those
succeeding it. After the last exposure in the sequence, the
film will wind to the next frame.
Notes:
• Too many multiple exposures on a frame tend to
overexpose it. so it is recommended that you expose a
frame just twice.
• When using Multi-Exposure, you can usually obtain best
results with dark backgrounds, such as those in night
scenes.
• During the process described in step 3 above, the date
will be imprinted on the frame. If you have the date
model, set to the imprinting mode.