Table of Contents
Advertisement
Use the self-timer when you wish to get yourself into the
picture. The number of frames to be automatically shot
can be set from 1 frame to 5 frames. Use of a tripod is
recommended.
Notes:
• To cancel the Self-Timer Shooting mode at any time
after it has been activated, slide the power switch
upward.
• When using the flash, the charging time will be added to
the normal interval between successive shots.
• Exposure is adjusted frame-by-frame, but focus remains
fixed at the first shot.
• For a setting of 2 shots, the second follows the first by 5
sec. For a setting of 3.4, or 5 shots, each shot follows
the preceding one by 2 sec.
0
la INT
Shooting procedure:
H While pressing the black SETTING button, move the
zooming lever to set on the LCD panel the desired
number of frames (from 1 to 5) to be shot.
Q Focus on a subject where the subject will appear, then
depress the shutter release button. The shutter will be
released in about 10 seconds. The self-timer lamp on
the front of the camera starts flickering 3 seconds
before the shutter is released.
Advertisement
Table of Contents
