Chapter 6: Storage; Storing The Machine - Toro eTimeCutter eMR4275 Operator's Manual

Storing the Machine

Store the machine, battery pack, and charger only in temperatures that are within the
appropriate range; refer to
1. Park the machine on a level surface, disengage the blade-control switch (PTO), and
engage the parking brake.
2. Shut off the machine, remove the key, and wait for all moving parts to stop before
leaving the operating position.
3. Remove the battery packs from the machine.
4. Remove grass clippings, dirt, and grime from the external parts of the entire machine,
especially the traction and blade motors, battery compartment, and underside of the
machine.
5. Check the parking brake operation.
6. Check the tire pressure.
7. Charge the batteries.
If you are storing the battery packs for the off-season, charge them until 2 or 3 LED
indicators turn green on the batteries. Do not store a fully charged or fully depleted
battery. When you are ready to use the machine again, charge the battery packs until
the left indicator light turns green on the charger or all 4 LED indicators turn green on
the batteries.
8. Scrape any heavy buildup of grass and dirt from the underside of the mower.
9. Check the condition of the blades.
10. Check and tighten all fasteners. Repair or replace any part that is damaged.
11. Paint all scratched or bare metal surfaces. Paint is available from your Authorized
Service Dealer.
12. Store the machine in a clean, dry garage or storage area. Remove the key from the
switch and keep it out of reach of children or other unauthorized users. Cover the
machine to protect it and keep it clean.
Storage
Specifications, page
IMPORTANT
Page 6–1
3–6.
Chapter 6
Storage
3445-793 A