Connections For Playback - Sony DVCAM DSR-200AP Operating Instructions Manual

Connections for playback

You can use this digital camcorder as a VCR by connecting it to monitor for playback.
There are some ways to connect the digital camcorder to monitor. When monitoring the
playback picture by connecting the digital camcorder to monitor, we recommend you to
use mains for power source.
Connecting directly to a monitor with Video/Audio input jacks
If you connect directly to a monitor
Open the jack cover and connect the digital camcorder to the inputs on the monitor by
using the supplied A/V connecting cable.
If you are going to connect the digital camcorder using the S video cable [a], you do not
need to connect the yellow (video) plug of the A/V connecting cable [b].
34
S VIDEO OUT
[a]
VIDEO OUT
[b]
AUDIO OUT
: Signal flow
S VIDEO IN
VIDEO IN
AUDIO IN