Figure 23. Typical ceiling suspension for parallel-to-airflow channels and perpendicular-to-airflow channels
Using Integral Base Frame
If a factory-provided integral base frame is used for ceiling
suspension, the individual sections and/or subassemblies will
have base frame shipping splits and base frame lifting lugs.
While using the base frame for ceiling suspension:
•
Suspend the unit (on both sides of the unit) at each
shipping split lug and on the four corners of the unit as
shown in the
Figure
24. See
and location.
CLCH-SVX009L-EN
Figure 22
for lug hole sizes
Installation - Mechanical
27