JVC HD-ILA HD-61Z585 User Manual page 67

ttis
very important that you NEVER TOUCH THE GLASS SURFACE OF THE NEW
LAMP. Touching the g}ass surface will deposit oils from your hand onto the lamp
surface. When the lamp heats up to its operating temperature, the oil will cause a
difference in temperature on the lamp Surface that will likely cause the lamp to break.
Replace the lamp with part number TS=CLliOU Onl2LThe television is designed
to work specifica!!y with tMs lamp_ Using a different lamp, ora _hird-PartY
manufactarerts lamp could cause a malfunction and or damage to the television.
This television uses a 110-Watt high-pressure mercury lamp to project images onto the
television screen. When the lamp nears the end of its operating life, you may notice the picture
becoming dark. When the picture begins to darken, or the tamp burns out, it is time to replace
the lamp. The following instructions will tell you how to safely replace the lamp.
WARNING!
Under operating conditions. THE LAMP WILL GET E×TREMELY HOT AND WILL
CAUSE SEVERE HURNS IF TOUCHED.
Hefore attempting to replace the lamp, make sure the television has completely run
through its cooling cycle. Turn the power off and wait untit the LAMP LED blinks very
slowly and turns off compJetely. Unplug the TV. ff you feel any warmth as you place
your hand near the lamp, DO NOT TOUCH IT. Wait until the lamp has completely
cooled before attempting to replace it. After turning the power off, wait at least I hour
or more,
NEVER attempt to replace the lamp with the television plugged into a wall outlet
Attempting to replace the lamp with the TV plugged in could lead to a severe electrical
shock.
Do not keep the TV on for mot e than 24 hours consecutively. There is the possibility
of the life of the TV being shortened.
The life of the lamp changes depending on the atmospheric temperature and altitude
in which the TV is being used.
Please read these instructions fully before attempting to replace the lamp. if you feel
Jnsure about replacing the lamp yourself, call a service technician.