JVC HD-ILA HD-61Z585 User Manual page 57

Turns the TVonoroff.
Press the POWER button
Note: A fter turning onthe power, you can not t urn the power off f orabout one minute.
Use the number buttons onthe remote control tomove d irectly toaspecific channel. For
example, tomove t ochannel 12:
(_ O(Zero)
C_ 1(One)
2(Two)
q
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the TUNE button. For example, to move to channel 12:
1 (One)
2 (Two)
(_ Press the TUNE button
Selects the signal input source for the television: tNPUT-1, 2, 3 or 4 for video devices like
VCR's DVD players, or camcorders.
(_ Press the INPUTbutton
Notes:
+ When you return to TV mode, press the RETURN+/TV button or direct 10 key pad.
+ You can also access the FRONT PANEL CONTROL screen by using the MENUbutton on
the side of the TV instead of the remote control, tt appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
INPUT by pressing MENU V on the side panel and choose a mode by using the CHANNEL+/+
buttons ( _ OPERATE _ ).
Use this button to directly select the digital-in input.
Press the DIGITAL-INbutton
+ DigitaPln on the menu will display only when the 480p picture signal in Digital-in is displayed.