JVC HD-ILA HD-61Z585 User Manual page 40

Channel guard a nd V-Chip settings are protected byafour-digit tock c ode. Your TVcomes
preset with atock c ode o f
"0000". You may change the code to any four-digit number you wish.
To change the lock code, follow the steps below.
Press the MENUbutton
,&_F To SET LOCK CODE
_ To operate (lock icon _ appears)
Press ZEROto access the lock code
The first digit will be highlighted
i_ To select the number
,&_" To move to the next digit
ILOCK CODE 0000
PRESS _TO FIN SH
Continue to follow these directions for all four numbers
Press the OK button to finish (your lock code is now set)
(_ Press the Menu button when finished
When a viewer attempts to watch a bIocked channel, this message appears:
THIS PROGRAMMING
EXCEEDS 1
YOUR RATING LIMITS.
PLEASE ENTER LOCK CODE BY /
!0 KEY PAD TO UNLOC K IT
NO.-_-
J
The channel will remain blocked until the correct lock code is entered (see above for
information on setting your lock code).
Notes:
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
• tf you forget the lock code, a new code may be set using the steps listed above.