JVC HD-ILA HD-61Z585 User Manual page 65

There is no power
• Check for a blown fuse or circuit breaker or a power outage.
• It is possible the fan is stuck or the inside temperature is rising abnormally
Consult your dealer.
The POWER LE D • It may be a malfunction that the fan is locked or the temperature has increased
and LAMP LED are
blinking alternately
The POWER LED • The lamp may not have been installed correctly, or it may be due to a malfunction
and LAMP LED are • The lamp door may not be closed correctly
blinking rapidly
simultaneously
There is no picture * The antenna could be disconnected.
or sound * The input mode could be set improperly. See page 57.
• The tuner (Auto Tuner Setup) could be set improperly. See page 32.
• The TV station may be having difficulties Check to see if other stations are working.
Remote control is not * Check to see that the batteries are still working and properly installed
operating properly or * Make sure the remote has a clear sight path to the TV.
at all * Check that the TV/CATV switch is in the proper position.
• You may be too far from the TV You must be within 23 feet (7 meters).
You cannot select a * Make sure the channels have been programmed. See "Channel Summary", page 32
certain channel * Check to see if the channel is locked See "Channel Summary - Lock" page 33
The power turns off * Make sure the set did not become unplugged.
by itself * Perhaps the On/Off Timer is set. See page 53
• Check to see if the Sleep Timer was set See page 59
It does not operate * This television is operated by a microprocessor, it is possible that external noise or
correctly interference is causing the problem. If the television does not function correctly, remove the
electrica_ plug from the wall outlet and wait a while before inserting it into the wall outlet
again and operating the television
The clock is wrong * The power was interrupted and the clock was not reset. See page 52
The color quality * Tint and Color may be improperly adjusted. See page 48.
is poor * The Video Status mode may be turned to the wrong setting. See page 59
There are lines * There could be interference from another electrical appliance, such as a computer,
across the picture arlother TV or VCR Move arly such appliances further away from the TV
The picture is spotted * There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference
There are double * A building or passing airplane can reflect the original signal and produce a second,
piclures (ghosts) slightly delayed one Adjust your antenna position
Picture is snowy * Your antenna may be damaged, disconnected or turned Check the ardenna
(image noise) connection If the antenna is damaged, replace it
Screen is 80% black * The Closed Caption Text mode is on Turn it off in the Closed Caption Menu, page 42
Stereo or bilingual * Make sure the MTS settings are correct See page 51
programs can't be
heard
The LAMP LED * It may be a malfunction of the internal electrical circuits
continues blinking