Table of Contents
Advertisement
Editing
Using an additional VCR, you can record programs from one VCR to the other. Here's how:
Editing from Another VCR
Here's how to edit from another VCR (such as an 8mm video
camera recorder for playback) when using this VCR for
recording.
Before you start:
@ Select LINE 1 or LINE 2 with INPUT SELECT, whichever
the playback VCR is connected to.
@ Select SP or EP with TAPE SPEED.
@ Select EDIT position to light the EDIT indicator in the
display window.
Buyp3
/ Guyprose
sows
-491ND
|
NOTE:
If your playback VCR has an editing function, select it to
reduce static and improve reception.
How to edit:
1 insert a blank cassette into the recording VCR.
2 Turn on the playback VCR and insert a source
cassette.
3 Locate the playback start point and select the
playback pause mode on the playback VCR.
4 Locate the recording start point and select the
recording pause mode on the recording VCR.
5 Press il PAUSE on both VCRs.
For best results, press Il PAUSE on the playback VCR
just before pressing II PAUSE on the recording VCR.
When you've finished editing, press IJ STOP on both
VCRs.
NOTES:
@ If your playback VCR is a stereo unit, make
connections with the supplied audio/video connecting
cable.
If your playback VCR is a monaural unit, connect the
white plug to LINE IN 2 AUDIO L on this VCR. This
lets you record the sound of the playback VCR on
both channels of this VCR. Do not connect the white
plug to LINE IN 2 AUDIO R.
When connecting the VCRs, do not connect both
LINE IN and LINE OUT jacks on your VCRs
simultaneously. Doing so may cause a humming
noise.
Advanced Operations | 55
Advertisement
Table of Contents
