Sony SLV-595SHF Operating Instructions Manual page 24

Presetting the Active Channels
Normally, the Auto Fine Tuning (AFT) setting on the menu is
set to ON, and the AFT function fine-tunes the picture. If the
picture of a channel is not acceptable, fine-tune it manually.
1 Display the TUNER PRESET menu referring to
steps 1 to 3 in "Presetting All Receivable
| Channels Automatically" (page 22).
i
/ 2 Press @or # to move the Ch |
TUNER PRESET
cursor to FINE TUNING.
HORN/CATY @NORM CATY
" : . . AUTO PRE
The fine tuning indicator is
displayed.
MANUAL SET @A0D ERASE
AFT 0!
> FINE TUNING
ir
3 Press <or> to geta TUNER PRESET CH 2
clearer picture. HORAICATY : eNORM CATY
AUTO PRESE
The AFT ON/OFF HANUAL SET @ADD ERASE
Mae rune or
>
OFF.
| automatically switches to
4 Press @ to move the
cursor to AFT and select | wornscaty — enonh CATV
TUNER PRESET CH 2
| ON if you cannot get a AUTO PRESET
MANUAL SET e@ADD ERASE
better picture. Then,
> AFT ook
OFF
FINE TUNING
| press EXECUTE.
Preparation
24
The FINE TUNING indicator
The FINE TUNING indicator shows the operable fine-tuning
range and stops at the optimal point of reception. When the
VCR's tuner is receiving an optimal broadcast signal, the
indicator stops at the center position or one space right or left
of the center position. However, even when a broadcast is
received in an optimal condition, the indicator may not be at
the position described.